Max Gear MAX 7142 Instruções de Operação descarregar pdf (Página 10)

Documented ProcedureBPA

D o c u m e n t e d P r o c e d u r e

MPZ 001

4100-001-06.05

Department TB / Schell

Assembly Plan

–

Toothed Racks

Servo Line

Page 10 24

Rev. Index D Name 01.06.05 Schell

Date 3.05.2011 released 01.06.05 Lorch

MPZ_001_engl.doc

Mounting instructions

Contact surface

Hexagon socket screws 12.9

M6 M8 M12

M16

M20

M30

M36

Tightening torque in Nm

16 40 135

340

660

2300

4100

Tightening torque in lbf in

142

354

1195

3010

5842

20357

36288

2. Insert the mating companion piece over the joint so that it meshes with the teeth of

the two racks and fix it on the opposite using a suitable contact surface.

Contact surface

No supporting surface available

agefläche vorhanden

Mating

piece

Suitable

contact surface

The machine bed should enable easy installation and

grease-free mounting of the rack.

1. Position the first rack on the machine bed, adjust it

concentrically, and clamp it to the contact surface with a

screw clamp. Insert the hexagon socket screws without

fully tightening them yet. Adjust the supporting surface of

the rack in relation to the machine guide. Then tighten the

hexagon socket screws as shown in the torque table

below, beginning in the middle and continuing outwards.

The screw clamps may be removed.

Fit the second rack at the joint and

clamp it with screw clamps

against the contact surface of the

machine bed. Insert the hexagon

socket screws and tighten them

slightly so that aligning is still

possible. The screw clamps may

be removed.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Drive Systems 1
MPZ 001 10

Comentários a estes Manuais

Sem comentários

Max Gear MAX 7142 Instruções de Operação Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores áudio Max Gear MAX 7142